top of page

Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).

SPIN opto controllers are provided with two JR connectors. Connector on the longer three-line cable with black ending is to be linked to the receiver. Connector on the shorter three-line cable with red ending is intended for communication with JETIBOX; for programming or data reading connect it into slot marked imp. + - on JETIBOX.


מק"ט: JSP-200-O
1,870.00 ₪מחיר
  • Weight [g] 326
    Dimensions [mm] 63 x 120 x 27
    Sustained current [A] 170
    Telemetry Yes
    Operational temperature [°C] -10 to 85
    Supply Voltage [V] 18 to 59
    Batteries NiXX -
    Batteries LiXX 6 to 14
    Max. Current BEC [A] -
    Voltage BEC [V] -
    Max. number of servos -
    Resistance in conducting state [mΩ] 2 x 1.00
    Number of power transistors 30
    Cable crossection (input/output) [mm²] 2 x 4.0 / 4.0
    Input capacitance [µF] 6 x 820
    OPTO (optically separated radio signal from the power management) Yes
bottom of page